SS Brand Forged Steel Pipe Fittings have Black Finish and these are pre treated to prevent Rust Formation. The brand had no Complaint for leakage on Fitment or in Operation within a recommended Pressure Range. We use the best quality of Steel Specially made for ‘Steel Forged Fittings’ the min Tensile strength of 320N/mm2 and max Tensile Strength 485N/mm2. The thread of these Fittings comply with the requirement of IS-554 : 1985. The Threaded Fittings are thoroughly checked with calibration Thread Gauge and are leak tested at 1000 psig hyd. And Socket Weld Fittings are leak tested at 3000 psig hyd. With calibrated Plug Gauges.
1). Threaded end connection Forged Steel Pipe Fittings as per IS : 1239 (part-2) 1992.
2). Socket Weld end connection Forged Steel Pipe Fittings as per IS : 1745 – 1984.
3). Sizes are 1/8” to 3” (4mm to 80mm)
Steel Specifications
  ELEMENT COMPOSITION
     
  Carbon 0.35 Max.
  Phosphorous 0.04 Max.
  Silicon 0.35 Max.
  Sulphur 0.05 Max.
  Manganese 0.60 – 1.05
NOTE : IS 1239 (part-2) 1992 Derived from BS 1740 : 1965
               IS 4712 – 1984 Derived from B 16.11 - 1973
 
Home | About us | Technica Aspects | Products | Manufacturing | Enquiry | Contact us
© 2001-2008 Pipe Fitting (India) All rights reserved. Developed by pridesystems.co.in